praca - 2 pozicie, HW aj SW

Josef Stengl ok1ced@nagano.cz
Středa Říjen 29 16:45:35 CET 2008


Dakujem,
    na(ne)stesti nesplnuji jeden bod v nabidkach, tak me nenapadne 
takova blbost k nemcine dohodit jeste francoustinu. Za mesic by jsem 
zaklady mozna zvladl i ja. No jo, v mladi jsem se flakal a ted mi to 
chybi, tesko se dohani ....
ced

Daniel Valuch wrote:
> asi treba konto v e-recruitment systeme, inak je to normalne verejne 
> pristupne. Preposielam aspon popis funkcii
>
> HW
> *Introduction*
>
>     The Radio Frequency Group (RF) of the Accelerator and Beams
>     Department (AB) is responsible for all the RF systems that are used
>     to accelerate the particle beams in the various accelerators of the
>     CERN complex. The Synchrotrons RF Section (SR) inside the RF Group
>     is responsible for design, construction and operation of RF cavities
>     and power amplifiers of these systems.
>
>     Substantial programs for consolidation and eventual upgrade of the
>     200MHz and 800MHz RF power systems of the Super Proton Synchrotron
>     (SPS) have been approved. An additional 200MHz RF system (ACN) is
>     being prepared for the Large Hadron Collider (LHC).
>
> *Functions*
>
>     You will be part of a small team responsible for the high power RF
>     systems of all present and future CERN accelerators. In particular,
>     you will:
>
>         * Participate in the operation, maintenance and improvement of
>           the installed high power RF systems and cavities. This
>           activity includes your participation in a first-line support
>           of the accelerator operation and will be an important part of
>           your on-the-job training;
>         * Contribute to design work on new high power RF systems based
>           on state of the art technology, using specialised simulation
>           and computing applications and liaise with other CERN teams
>           and services;
>         * Contribute to the full cycle of design, manufacturing and
>           operation for power amplifiers and power couplers for the LHC
>           200MHz RF system (ACN);
>         * Participate in the upgrade of the 800MHz RF system of the
>           Super Proton Synchrotron (SPS), involving use of new RF power
>           devices;
>         * In close interaction with other specialist teams in the RF
>           group, you will also participate in the specification of low
>           power RF and controls equipment and in testing of complete
>           systems in the accelerators;
>         * Document and present your work as appropriate;
>
>
>     Special attention to safety issues, from system design
>     considerations through to installation and operating procedures will
>     be an essential element in all of this work.
>
> *Qualification required*
>
>     Technical engineer diploma or equivalent in electrical engineering
>
> *Experience and knowledge*
>
>         * Good knowledge in electrical circuitry and some relevant
>           experience in this domain.
>         * Some knowledge and experience in high voltage techniques with
>           some knowledge of or a keen interest in RF technology would be
>           distinct advantages.
>         * Ability to work effectively both independently and as part of
>           a pluri-disciplinary team
>         * Strong sense of responsibility and initiative.
>         * Good knowledge of either French or English, with basic
>           knowledge of the other language or an undertaking to acquire
>           it rapidly.
>
>
>
> SW
> *Introduction*
>
>     The Radio Frequency Group (RF) is responsible for all the RF systems
>     that are used to accelerate the particle beams in the various
>     accelerators of the CERN complex. Current major projects are the RF
>     systems for the Large Hadron Collider (LHC), presently in
>     commissioning and a new injection Linear Accelerator (LINAC4) now in
>     construction.
>
>     The Cavity Servos and Controls Interface Section (CS) of the RF
>     Group designs, maintains and operates the slow and fast digital
>     control sytems needed for the RF systems. The activities include
>     hardware design with programmable logic, digital signal processing,
>     process control with Programmable Logic Controllers (PLCs),
>     real-time control using VMEbus front-end computers, and development
>     of application software running on operator consoles.
>
> *Functions*
>
>     As a software specialist in the CS Section you will be part of a
>     small multicultural team responsible for developing controls
>     software for the RF systems of the Large Hadron Collider, LINAC4 and
>     and other accelerators in the CERN complex. In particular, you will:
>
>         * Actively contribute to the analysis and design of the control
>           software required to operate the newly-developed RF systems of
>           the LHC.
>         * Design and develop:
>               o Real-time control software running on VME systems for
>                 the digital beam control and feedback systems;
>               o Supervision software for the PLCs controlling the RF
>                 high-power systems;
>               o Graphical application software for operation;
>               o Diagnostic software for surveillance and
>                 post-operational checks of the RF equipment.
>         * Collaborate with the Controls and Operations teams for the
>           integration of the RF equipment into the accelerator control
>           system.
>         * Contribute to the first-line support provided by the group for
>           the operation of the accelerators.
>         * Document and present your work as appropriate.
>
> *Qualification required*
>
>     Technical engineer diploma or equivalent in computer science.
>
> *Experience and knowledge*
>
>         * Up to five years’ experience in software development (Unix, C,
>           C++, Java) and good knowledge of software development methods
>           and related tools.
>         * Some experience or knowledge in one or several of the
>           following domains would be an advantage:
>               o Low-level programming on LynxOS and/or Linux (Drivers,
>                 I/O libraries);
>               o Digital electronics and/or control and feedback systems;
>               o PLC systems;
>               o Graphical programming environments such as LabView.
>         * Good communication skills and ability to work effectively in
>           multidisciplinary project teams.
>         * Good knowledge of either French or English with basic
>           knowledge of the other language, or an undertaking to acquire
>           it rapidly.
>
>
>
>
> Josef Stengl wrote:
>   
>> Ne že bych se tak mohutně ucházel o místo v cernu (anglicky jsem se 
>> ješte pořádně nenaučil, německy jsem už zapoměl jak teď zjištuji  a 
>> francouština je pro mě španělská vesnice), ale ty odkazy co jsi poslal 
>> vypadají jako z intanetu a pro přísup z internetu na tebe vybafne 
>> stránkadožující se přihlášení. Já vím, že bych si to mohl vyhledat a 
>> možná by to bylo rychlejší než psát tyhle plky, ale mohu si rýpnout.
>> Jen doufám že to není místním proxy serverem.
>> ced
>>
>> Daniel Valuch wrote:
>>   
>>     
>>> mozno bude niekoho zaujimat, mame otvorene dve pozicie na urovni 
>>> bakalara/inziniera (~4 roky vysokej skoly), nie doktorat.
>>> Prva vykonove VF systemy so zameranim na vyvoj hardware (elektronkove 
>>> zosilnovace vysokych vykonov a Vf komponenty)
>>> https://ert.cern.ch/browse_intranet/wd_pds?p_web_page_id=6586
>>> a druha software pre VF systemy 
>>> https://ert.cern.ch/browse_intranet/wd_pds?p_web_page_id=6595
>>> Ak som to spravne pochopil na prvu poziciu bolo zatial prihlasenych 0 
>>> (slovom 0) uchadzacov :-)
>>> b.
>>>     
>>>       
>
> _______________________________________________
> HW-list mailing list  -  sponsored by www.HW.cz
> Hw-list@list.hw.cz
> http://list.hw.cz/mailman/listinfo/hw-list
>   





Další informace o konferenci Hw-list