Raspberry-NTP se nechce chytit

[Zapletal Martin]

takže ntpdate se chytí a nastaví správný čas. Co je tedy špatně s ntpd?

MZ
----- Original Message ----- 
From: "Tomáš Koželuh" <mr.death na ipq.cz>
To: "'HW-news'" <hw-list na list.hw.cz>
Sent: Wednesday, June 15, 2016 2:15 PM
Subject: RE: Raspberry-NTP se nechce chytit


apt-get install ntpdate
?

> -----Original Message-----
> From: Hw-list [mailto:hw-list-bounces na list.hw.cz] On Behalf Of Zapletal
> Martin
> Sent: Wednesday, June 15, 2016 2:13 PM
> To: HW-news
> Subject: Re: Raspberry-NTP se nechce chytit
>
> takový příkaz v mém raspbianu vůbec není. Update a upgrade jsem dělal
> před půl hodinou.
>
> MZ
>
> ----- Original Message -----
> From: Ladislav Vaiz <mailto:spam na nagano.cz>
> To: HW-news <mailto:hw-list na list.hw.cz>
> Sent: Wednesday, June 15, 2016 2:09 PM
> Subject: Re: Raspberry-NTP se nechce chytit
>
> ntpd běží nějakou dobu? Reach je bitová maska, jak se při posledních
> pokusech podařilo dosáhnout server. Nula znamená, že odpověď nikdy
> nedorazila. Mělo by tam po čase být 377 (je to osmičkově).
> Zkuste ntpdate -u 192.168.1.1
> L.
>
>
>
> On 15.6.2016 14:02, Zapletal Martin wrote:
>
>
> Zdravím přítomné.
> Už od rána ležím nad problémem synchronizace času NTP
> serveru. Už jsem prolezl celý internet ale jako nonlinux guru z toho moc
> moudrý nejsem. Výpis příkazu sudo ntpq -p mi vypíše
>
>      remote           refid      st t when poll reach
delay   offset
> jitter
>
> ====================================================
> ==========================
> 192.168.1.1     .INIT.          16 u    -   64    0
0.000    0.000   0.000
> tik.cesnet.cz   .INIT.          16 u    -   64    0
0.000    0.000   0.000
> tak.cesnet.cz   .INIT.          16 u    -   64    0
0.000    0.000   0.000
>
> už zkouším všechno možné, i spojení na 192.168.1.1 což je
> router který NTP má. Poradíte mi prosím co zkontrolovat?
> Takhle vypadá ntp.conf
>
> # /etc/ntp.conf, configuration for ntpd; see ntp.conf(5) for
> help
>
> driftfile /var/lib/ntp/ntp.drift
>
>
>
> # Enable this if you want statistics to be logged.
> #statsdir /var/log/ntpstats/
>
> statistics loopstats peerstats clockstats
> filegen loopstats file loopstats type day enable
> filegen peerstats file peerstats type day enable
> filegen clockstats file clockstats type day enable
>
>
> # You do need to talk to an NTP server or two (or three).
> #server ntp.your-provider.example
>
> # pool.ntp.org maps to about 1000 low-stratum NTP servers.
> Your server will
> # pick a different set every time it starts up.  Please
consider
> joining the
> # pool: <http://www.pool.ntp.org/join.html>
>
> #puvodni nastaveni
> #server 0.debian.pool.ntp.org iburst
> #server 1.debian.pool.ntp.org iburst
> #server 2.debian.pool.ntp.org iburst
> #server 3.debian.pool.ntp.org iburst
>
> #nove nastaveni cz casovych serveru
> server 192.168.1.1 prefer
> server tik.cesnet.cz
> server tak.cesnet.cz
>
> # Access control configuration; see /usr/share/doc/ntp-
> doc/html/accopt.html for
> # details.  The web page
> <http://support.ntp.org/bin/view/Support/AccessRestrictions>
> # might also be helpful.
> #
> # Note that "restrict" applies to both servers and clients,
so a
> configuration
> # that might be intended to block requests from certain
> clients could also end
> # up blocking replies from your own upstream servers.
>
> # By default, exchange time with everybody, but don't allow
> configuration.
> restrict -4 default kod notrap nomodify nopeer noquery
> restrict -6 default kod notrap nomodify nopeer noquery
>
> # Local users may interrogate the ntp server more closely.
> restrict 127.0.0.1
> restrict ::1
>
> # Clients from this (example!) subnet have unlimited access,
> but only if
> # cryptographically authenticated.
> #restrict 192.168.123.0 mask 255.255.255.0 notrust
>
>
> # If you want to provide time to your local subnet, change
the
> next line.
> # (Again, the address is an example only.)
> #broadcast 192.168.123.255
>
> # If you want to listen to time broadcasts on your local
> subnet, de-comment the
> # next lines.  Please do this only if you trust everybody on
the
> network!
> #disable auth
> #broadcastclient
>
>
>
>
> _______________________________________________
> HW-list mailing list  -  sponsored by www.HW.cz
> Hw-list na list.hw.cz
> http://list.hw.cz/mailman/listinfo/hw-list
>
>
>
> ________________________________
>
>
>
>
> _______________________________________________
> HW-list mailing list  -  sponsored by www.HW.cz
> Hw-list na list.hw.cz
> http://list.hw.cz/mailman/listinfo/hw-list
>


_______________________________________________
HW-list mailing list  -  sponsored by www.HW.cz
Hw-list na list.hw.cz
http://list.hw.cz/mailman/listinfo/hw-list