eagle - restrict polygonu pro vnitrni vrstvy - jde to nejak ?

[admin.mtech@gmail.com]

Hmm, tak ten blbec vyexportoval ciaru z nulovou sirkou, ale nahradil ju
(pritom toleranciu + ma 0%):
Takze tudy cesta asi nepovede.....
 

Parameter settings:
 
 Emulate Apertures : yes
 Emulate Thermal   : no
 Emulate Annulus   : no
 Tolerance Draw  + :  0.00 %
 Tolerance Draw  - :  5.00 %
 Tolerance Flash + :  5.00 %
 Tolerance Flash - :  5.00 %
 Rotate            : no
 Mirror            : no
 Optimize          : yes
 Auto fit          : yes
 OffsetX           : 0inch
 OffsetY           : 0inch

Plotfile Info:
 
 Coordinate Format : 2.4
 Coordinate Units  : Inch
 Data Mode         : Absolute
 Zero Suppression  : None
 End Of Block      : *
 
Aperture Tolerances:
 
 -------- Requested Aperture --------  ------ Used Aperture ------
 
 Shape     Size                  used  Code     Shape     Size
 
 draw      0.1500inch              26  D37      draw      0.1440inch
 
Emulated Apertures:
 
 -------- Requested Aperture --------  ------ Used Aperture ------
 
 Shape     Size                  used  Code     Shape     Size
 
 rectangle 0.0430inch x 0.0550inch    64  D12      draw      0.0080inch
 rectangle 0.0846inch x 0.0709inch     4  D14      draw      0.0120inch
 rectangle 0.0118inch x 0.0591inch    24  D10      draw      0.0040inch
 rectangle 0.0591inch x 0.0118inch    24  D10      draw      0.0040inch
 rectangle 0.0750inch x 0.1500inch     1  D14      draw      0.0120inch
 rectangle 0.0630inch x 0.0709inch     4  D14      draw      0.0120inch
 rectangle 0.2126inch x 0.2441inch     1  D21      draw      0.0400inch
 rectangle 0.0394inch x 0.0630inch     2  D11      draw      0.0060inch
 square    0.0500inch               3  D13      draw      0.0100inch
 rectangle 0.0551inch x 0.0709inch     2  D13      draw      0.0100inch
 rectangle 0.1161inch x 0.1063inch     2  D16      draw      0.0200inch
 draw      0.0000inch               4  D10      draw      0.0040inch
<<<<<<<<<<<<<<
 
 
 
-mt-


  _____  

From: hw-list-bounces@list.hw.cz [mailto:hw-list-bounces@list.hw.cz] On
Behalf Of hrochmusic@centrum.cz
Sent: Wednesday, January 30, 2008 4:03 PM
To: hw-list@list.hw.cz
Subject: Re: eagle - restrict polygonu pro vnitrni vrstvy - jde to nejak ?


To by chtelo, aby se ozval nekdo, kdo jiz na desce nechal caru s nulovou
sirkou. Formica to ma napriklad tak, ze se takovato cara proste neexportuje.
Tam je nulovou carou vlastne resen veskery restrict.

TO
______________________________________________________________
> Od: L.Grepl@sh.cvut.cz
> Komu: HW-news <hw-list@list.hw.cz>
> Datum: 30.01.2008 14:02
> Předmět: Re: eagle - restrict polygonu pro vnitrni vrstvy - jde to nejak ?
>
>> Ovsem ten napad s trackem nulove sirky, pres ktery polygon neproleje, to
> se mi jevi jako velmi zajimave. vyzkousim to.
>
>To by melo kazdopadne fungovat, problem akorat je, ze sirka 0 v podstate
znamena 1px v libovolnem rozliseni. Takze i na DPS pak mozna (v zavislosti
na parametrech vyroby) ten spoj castecne bude. Coz muze nebo nemusi vadit,
zalezi na uhlu pohledu.
>
>Lukas Grepl
>_______________________________________________
>HW-list mailing list  -  sponsored by www.HW.cz
>Hw-list@list.hw.cz
>http://list.hw.cz/mailman/listinfo/hw-list
> 

------------- další část ---------------
HTML příloha byla odstraněna...
URL: http://list.hw.cz/pipermail/hw-list/attachments/20080130/05a64ed6/attachment-0002.htm