ATtiny2313 a uisp?

[Martin Malý]

Ano, tusim... Problem je v programovacim algoritmu. ATtiny2313 je sice
"similar 90S2313", ale neni to uplne totez. A jeden z rozdilu je i
ten, ze do ATtiny se musi zapisovat po blocich, zatimco do 90S2313 se
zapisuje po bajtech...

Takze - jiny programovaci soft, takovy, ktery umi ATtiny2313 a nebude
se jej snazit programovat jako 90S2313

Martin Maly


On Tue, 22 Mar 2005 20:12:13 +0100, Petr Tomasek <tomasek@etf.cuni.cz> wrote:
> 
> Dobry den!
> 
> Podarilo se nekomu naprogramovat ATtiny2313 pomoci
> uisp ("dapa" programator, tj. nejjednodsi seriovy programator
> pres paralelni port)?
> 
> Erasing device ...
> Reinitializing device
> AVR Direct Parallel Access succeeded after 0 retries.
> Vendor Code: 0x1e
> Part Family: 0x91
> Part Number: 0x0a
> Atmel AVR similar to the AT90S2313 is found.
> Page Write Disabled
> FLASH Write Delay (t_wd_flash): 11111 us
> EEPROM Write Delay (t_wd_eeprom): 11111 us
> Uploading: flash
> #Error: Data polling readback status: write=0x0a read=0xff
> make: *** [load] Aborted
> 
> Tusite nekdo, co s tim?
> Diky!
> 
> P.T.
> 
> --
> Petr Tomasek <http://www.etf.cuni.cz/~tomasek>
> 
> _______________________________________________
> HW-list mailing list  -  sponsored by www.HW.cz
> Hw-list@list.hw.cz
> http://list.hw.cz/mailman/listinfo/hw-list
>