Zmena podsviceni displeje

[Dusan Dolezal]

Super, diky moc, tak ho asi pouziju. Tech 122mm mne vylekalo.

Dusan Dolezal 

> -----Original Message-----
> From: hw-list-bounces@list.hw.cz 
> [mailto:hw-list-bounces@list.hw.cz] On Behalf Of Ivo Strasil
> Sent: Monday, July 11, 2005 3:03 PM
> To: HW-news
> Subject: Re: Zmena podsviceni displeje
> 
> 84x44mm
> Kontakty jsou dole, aby bylo spravne orientovane pismo.
> 
> Ivos
> 
> Skript do knihovny eagla:
> 
> Edit 1602E.pac;
> Description '';
> Layer 21;
> Wire  0.127 (-50.8 21.18) (33.1 21.18) (33.1 -22.82) (-50.8 -22.82) \
>        (-50.8 21.18);
> Wire  0.127 (-39.3 11.18) (21.6 11.18) (21.6 -12.82) (-39.3 -12.82) \
>        (-39.3 11.18);
> Layer 21;
> Circle 0.127 (-47.3 17.68) (-45.55 17.68);
> Layer 21;
> Circle 0.127 (-47.3 -18.32) (-45.55 -18.32);
> Layer 21;
> Circle 0.127 (29.6 -19.32) (31.35 -19.32);
> Layer 21;
> Circle 0.127 (29.6 17.68) (31.35 17.68);
> Change Drill 1.016;Pad '1' Offset 0 R270 (-7.62 -20.32);
> Change Drill 1.016;Pad '2' Offset 0 R270 (-10.16 -20.32);
> Change Drill 1.016;Pad '3' Offset 0 R270 (-12.7 -20.32);
> Change Drill 1.016;Pad '4' Offset 0 R270 (-15.24 -20.32);
> Change Drill 1.016;Pad '5' Offset 0 R270 (-17.78 -20.32);
> Change Drill 1.016;Pad '6' Offset 0 R270 (-20.32 -20.32);
> Change Drill 1.016;Pad '7' Offset 0 R270 (-22.86 -20.32);
> Change Drill 1.016;Pad '8' Offset 0 R270 (-25.4 -20.32);
> Change Drill 1.016;Pad '9' Offset 0 R270 (-27.94 -20.32);
> Change Drill 1.016;Pad '10' Offset 0 R270 (-30.48 -20.32);
> Change Drill 1.016;Pad '11' Offset 0 R270 (-33.02 -20.32);
> Change Drill 1.016;Pad '12' Offset 0 R270 (-35.56 -20.32);
> Change Drill 1.016;Pad '13' Offset 0 R270 (-38.1 -20.32);
> Change Drill 1.016;Pad '14' Offset 0 R270 (-40.64 -20.32);
> Change Drill 1.016;Pad '15' Offset 0 R270 (-5.08 -20.32);
> Change Drill 1.016;Pad '16' Offset 0 R270 (-2.54 -20.32);
> Layer 21;
> Change Size 1.27;
> Change Ratio 0;
> Text '14' R0 (-41.275 -19.05);
> Layer 21;
> Change Size 1.27;
> Change Ratio 0;
> Text '1' R0 (-8.255 -19.05);
> Layer 21;
> Change Size 1.27;
> Change Ratio 0;
> Text '15' R0 (-5.715 -19.05);
> Layer 21;
> Change Size 1.27;
> Change Ratio 0;
> Text '16' R0 (-3.175 -19.05);
> Layer 25;
> Change Size 1.27;
> Change Ratio 8;
> Text '>Name' R0 (-38.1 8.89);
> Layer 27;
> Change Size 1.27;
> Change Ratio 8;
> Text '>Value' R0 (-38.1 6.35);
> _______________________________________________
> HW-list mailing list  -  sponsored by www.HW.cz
> Hw-list@list.hw.cz
> http://list.hw.cz/mailman/listinfo/hw-list
>