Prace pro odbornika na DSP Texas Instruments

[pa-vep@atlas.cz]

No kdysi sem delal na 050tce mozna by to slo.


Vývoj software C++ ,Visualprog,
PDA PocketPC,TCP/IP komunikace,RS232(485), rízení,sber dat.
http://evcswhw.mujweb.cz 




-----Original Message-----
From:	"owner-hw-news@list.gin.cz" <owner-hw-news@list.gin.cz> on behalf of	"Vaclav Kadoun" <wendy@ipex.cz>
Sent:	Monday, January 07, 2002 5:01 PM
To:	"hw-news@list.gin.cz" <hw-news@list.gin.cz>
Subject:	Prace pro odbornika na DSP Texas Instruments

Zdravim,
pro jeden projekt shanime odbornika na DSP TI TMS-320LF2407 schopneho
napsat a odladit aplikaci dle zadani. Bylo by to velmi dobre zaplaceno,
dulezita je zodpovednost a spolehlivost...

Zacatek zadani je zde, zbytek si mohou zajemci stahnout na
http://www.ipex.cz/~wendy/DSP.htm

Nabidky a dotazy smerujte prosim na feela@network.cz

Dekuji,

-------------
S pozdravem
Vaclav Kadoun

*************************************************************************
The DSP which should be used in this application is the Texas 320 LF 2407
in a PGEA housing. It has an integrated A/D converter with 10 bit
resolution and 0.5uS sampling time .

It has an on-chip 2.5 k RAM and an external RAMof 64 k for data and 64k
for program. Flash is 32k.

The application is to detect the frequency of an exponentially decaying
cosine oscillation, created by a flashover in a cable. There is a separate
paper , Auswertung_21.doc, which describes in german the principle of
operation. The basic information is contained in §4.