Menic -10V
Jindrich Vidensky
vidensky
Středa Březen 17 11:50:47 CET 2004
Toto zapojenie som kdesi vyhrabal, nemam odskusane.
Treba to samozrejme pozriet s neproporcionalnym fontom.
S pozdravom
Jindrich Vidensky
vidensky@klimakonzult.sk
+V
^
|
+-------+---+
| | | -V Output
R1 |8 |4 +----+--->
| 7 ------- | | Parts List:
+-----| | D2 | IC1 = 555
| +--| | + | | R1 = 1.5K
R2 | 6| IC1 |---C1--+ | R2 = 10K
| | | |3 | | C1 = 150uF,16V (10 uF)
+--+--| | D1 C2 C2 = 1uF,16V (22 uF)
| 2| | | |+ C3 = 3300pF (1500pF)
| ------- | | D1,D2 = 1N4154 diodes (1N4001)
C3 |1 | |
| | | |
+---------+-----------+----+ * green parts were changed from the original (that are HERE)
for my configuration
|
===
(GND)
Note: In the above "diagram", both diodes point down (the anodes are at the top). Also, watch the polarity
of C1 & C3.
The circuit is set up to oscillate at about 45kHz, with a duty cycle pretty close to 50%.
None of the values of any of the parts are terribly critical, so if the capacitors
or resistors are "in the ballpark", it should still work okay.
Další informace o konferenci Hw-list