Re: AVR fuses

[DavPra]

Ne windows nemam.

> ------------ Původní zpráva ------------
> Od: Martin Hanek <martin.hanek@centrum.cz>
> Předmět: Re: AVR fuses
> Datum: 29.5.2008 15:23:24
> ----------------------------------------
> Podivejte se na ty signaly LPT jak uz Vam nekdo radil. To nejspise 
> nebude nastavenim.
> 
> Mate windowsy? Jestli jo, tak zkuste jiny soft:
> http://elm-chan.org/works/avrx/report_e.html
> konkretne kabel:
> http://elm-chan.org/works/avrx/avrx_lpt.png
> a software:
> http://elm-chan.org/works/avrx/avrxtool32.zip
> 
> Martin Hanek
> 
> 
> DavPra napsal(a):
> > Diky moc za nazornou ukazku.. 
> > Na netu sem taky nasel tento kalkulator
> http://palmavr.sourceforge.net/cgi-bin/fc.cgi a nastvil sem hodnoty na defaul:
> > 
> > -U lfuse:w:0x64:m -U hfuse:w:0xDF:m
> > 
> > a stejne mi to haze chybu..
> > 
> > avrdude -p t2313 -c stk200 -U flash:w:pokus.hex -U lfuse:w:0x64:m -U
> hfuse:w:0xDF:m
> > 
> > avrdude: AVR device initialized and ready to accept instructions
> > 
> > Reading | ################################################## | 100% 0.00s
> > 
> > avrdude: Device signature = 0x1e910a
> > avrdude: safemode: Verify error - unable to read lfuse properly. Programmer
> may not be reliable.
> > avrdude: safemode: To protect your AVR the programming will be aborted
> > 
> > avrdude done.  Thank you.
> > 
> > make: *** [load] Error 1
> > 
> > Myslite, ze je to tim ze to zkousim na notasu a mohl by mit "slaby" LPT...?
> > 
> > S pozdravem Boldak
> _______________________________________________
> HW-list mailing list  -  sponsored by www.HW.cz
> Hw-list@list.hw.cz
> http://list.hw.cz/mailman/listinfo/hw-list
> 
> 
>